Fully customizable, high functioning building enclosure systems manufactured to meet the performance and aesthetic needs of your project. Utilizing modern equipment and skilled prefabrication technicians Mammoth delivers high quality systems quickly, to save you time and reduce costs.
Mammoth systems are third-party tested and code compliant. In comparison to traditional precast panels, Mammoth panels are lightweight, energy efficient, durable and warrantied.
Mammoth systems are third-party tested and code compliant. Mammoth panels are lightweight, energy efficient, durable, and warrantied.
Non-load bearing systems with an unlimited variety of finishes and components to help you exceed project requirements.
This panel features a patented drainage component, exterior continuous insulation, as well as StoGuard waterproof air-barrier.
Than conventional systems, with an average weight of 25 lbs per sq ft.
In accordance with the LEED v4.1 Green Building Standard for New Construction.
StoPanel Brick ci is a lightweight, energy efficient prefabricated exterior wall panel with a continuous air & moisture barrier, exterior insulation as an option and a variety of thin veneers, such as thin brick; all at a fraction of the weight of conventional thick brick/or other thick veneers.
Than conventional systems, with an average weight of 25 lbs per sq ft.
In accordance with the LEED v4.1 Green Building Standard for New Construction.
StoPanel Precast ci is a lightweight, energy efficient prefabricated exterior wall panel with a continuous air & moisture barrier, exterior insulation and a variety of integral decorative & protective finish options to replicate precast concrete; all at a fraction of the weight of precast concrete.
Per square foot. Lightweight and efficient.
In accordance with the LEED v4.1 Green Building Standard for New Construction.
The StoPanelTM Swisspearl® ci system uniquely combines the convenience and cost-effectiveness of offsite panel manufacturing with the look and feel of an innovative modern aesthetic.
Than conventional systems, with an average weight of 8-10 lbs per sq ft.
In accordance with the LEED v4.1 Green Building Standard for New Construction.
The starting point for all StoPanel cladding options. Consisting of cold formed steel, glass-mat faced gypsum sheathing and StoGuard air & moisture barrier; StoPanel Backup is the backbone of StoPanel Technology.
Pounds per square foot (minus cladding). Lightweight and efficient.
In accordance with the LEED v4.1 Green Building Standard for New Construction.
This system features a metal panel face, continuous air & moisture barrier, exterior insulation and fully customizable, unlimited design option while maintaining high-performance standards. Dri-Design panels are easy to install and benefit project schedules by speeding up construction.
Pounds per square foot. Making it significantly lighter compared to other metal panel systems.
In accordance with the LEED v4.1 Green Building Standard for New Construction.
The starting point for all StoPanel cladding options. Consisting of cold formed steel, glass-mat faced gypsum sheathing and StoGuard air & moisture barrier; StoPanel Backup is the backbone of StoPanel Technology.
Pounds per square foot (minus cladding). Lightweight and efficient.
In accordance with the LEED v4.1 Green Building Standard for New Construction.
A double layer system separated by a ventilated air cavity that allows moisture that makes its way into the cavity to both drain and dry quickly. The inner air vapor barrier protects the building from moisture and vapor that is inside of the cavity, providing the building with added protection. Thermal performance of the building is also greatly benefitted by keeping rain water away from the exterior wall.
The outer surface is generally an architectural finish such as:
The starting point for all StoPanel cladding options. Consisting of cold formed steel, glass-mat faced gypsum sheathing and StoGuard air & moisture barrier; StoPanel Backup is the backbone of StoPanel Technology.
Pounds per square foot (minus cladding). Lightweight and efficient.
In accordance with the LEED v4.1 Green Building Standard for New Construction.
The starting point for all StoPanel cladding options. Consisting of cold formed steel, glass-mat faced gypsum sheathing and StoGuard air & moisture barrier; StoPanel Backup is the backbone of StoPanel Technology.
Pounds per square foot (minus cladding). Lightweight and efficient.
In accordance with the LEED v4.1 Green Building Standard for New Construction.
This panel features a patented drainage component, exterior continuous insulation, as well as StoGuard waterproof air-barrier.
Than conventional systems, with an average weight of 8 lbs per sq ft.
In accordance with the LEED v4.1 Green Building Standard for New Construction.
StoPanel Brick ci is a lightweight, energy efficient prefabricated exterior wall panel with a continuous air & moisture barrier, exterior insulation as an option and a variety of thin veneers, such as thin brick; all at a fraction of the weight of conventional thick brick/or other thick veneers.
Than conventional systems, with an average weight of 25 lbs per sq ft.
In accordance with the LEED v4.1 Green Building Standard for New Construction.
StoPanel Precast ci is a lightweight, energy efficient prefabricated exterior wall panel with a continuous air & moisture barrier, exterior insulation and a variety of integral decorative & protective finish options to replicate precast concrete; all at a fraction of the weight of precast concrete.
Pounds per square foot. Lightweight and efficient.
In accordance with the LEED v4.1 Green Building Standard for New Construction.
StoPanel Swisspearl® system features a continuous air & moisture barrier, exterior insulation and fully customizable, and unlimited design options. Plus, Swisspearl® panels are easy to install and are built to the highest industry standards.
Than conventional systems, with an average weight of 14-18 lbs per sq ft.
In accordance with the LEED v4.1 Green Building Standard for New Construction.
The starting point for all StoPanel cladding options. Consisting of cold formed steel, glass mat sheathing, and StoGuard air & moisture barrier; StoPanel Backup is the backbone of StoPanel Technology.
Per square foot (minus cladding). Lightweight and efficient.
In accordance with the LEED v4.1 Green Building Standard for New Construction.
This system features a metal panel face, continuous air & moisture barrier, exterior insulation and fully customizable, unlimited design option while maintaining high-performance standards. Dri-Design panels are easy to install and benefit project schedules by speeding up construction.
Pounds per square foot. Making it significantly lighter compared to other metal panel systems.
In accordance with the LEED v4.1 Green Building Standard for New Construction.
A double layer system separated by a ventilated air cavity allows moisture to makes its way into the cavity to both drain and dry quickly. The inner air vapor barrier protects the building from moisture is inside of the cavity, providing the building with added protection. The thermal performance of the building is also significantly benefited by keeping rainwater away from the exterior wall.
The outer surface is generally an architectural finish such as
Basic framing, cold-formed metal studs. It can be welded or fastened. Manufactured with a compression table, to get the strength needed to support the load of the building. All bracing will be placed. The exterior gypsum board will installed on the exterior wall panels only. Have the ability to install a weather barrier in the shop. Sto Gold coat or Fast Flash. We have the ability to install windows in the shop, it would be an added cost.
This panel includes continuous air & moisture barrier, exterior insulation as an option, and a variety of thin veneers, all at a fraction of the weight of conventional thick brick/or other thick veneers.
Less weight than traditional brick or stone while maintaining aesthetic.
In accordance with the LEED v4.1 Green Building Standard for New Construction.
Load Bearing panels are built to provide superior structural integrity to your project in a very short time frame.
Basic cold-formed steel panels complete with all rough openings, headers, and bridging. Load-bearing panels are manufactured in a compression table to get the strength needed to support the diaphragm of the building. All panels are manufactured in a quality-controlled shop. Mammoth's scope typically includes exterior, demising, and corridor walls for load-bearing projects. To learn more about this system, please visit our Strategic Partner's website.
Exterior wall panels are built with a basic stud assembly, and sheathing is included on exterior panels only. The gypsum board installed on the walls can be any specified exterior drywall. Mammoth also can install weather barrier in our shop. All panels are manufactured in a quality-controlled shop. Mammoth's scope typically includes exterior, demising, and corridor walls for load-bearing projects. To learn more about this system, please visit our Strategic Partner's website.
An element designed to simplify the scope across trades. Brick ties are strategically placed throughout the exterior of the design to simplify masonry work performed in the field and guarantee consistent quality.
For more information on these systems visit our strategic partner,
All Steel Mid-rise
For more information on these systems visit our strategic partner,
All Steel Mid-rise
Basic cold-formed steel panels complete with all rough openings, headers, and bridging. Load-bearing panels are manufactured in a compression table to get the strength needed to support the diaphragm of the building. All panels are manufactured in a quality-controlled shop. Mammoth's scope typically includes exterior, demising, and corridor walls for load-bearing projects. To learn more about this system, please visit our Strategic Partner's website.
Exterior wall panels are built with a basic stud assembly, and sheathing is included on exterior panels only. The gypsum board installed on the walls can be any specified exterior drywall. Mammoth also can install weather barrier in our shop. All panels are manufactured in a quality-controlled shop. Mammoth's scope typically includes exterior, demising, and corridor walls for load-bearing projects. To learn more about this system, please visit our Strategic Partner's website.
An element designed to simplify the scope across trades. Brick ties are strategically placed throughout the exterior of the design to simplify masonry work performed in the field and guarantee consistent quality.
Crew consolidation, single source building envelope & finishes, single source liability.
An unlimited range of finishes gives Owners & Architects the intended aesthetic and value more affordably.
Mammoth systems require 85% less time for building erection when compared to traditional construction. Saving you time and allowing for quicker ROI.
Advanced, off-site manufacturing allows for high quality control. Inspections are done for every panel at every critical step of the process.
High performance envelope with continuous insulation systems. Compliant with energy requirements.
Learn through in-depth case studies and articles how prefabricated building enclosures are changing the industry.
